|
|
|
|
|
|
|
|
|
 |
Turntables - Overview
Use the table below to call up more detailed information about the various models:
 |
|
ø (m) |
|
|
Load-bearing
capacity (kg) |
|
|
Overall height (mm) |
- Universal display turntable
- Rotating current transmission up to 4 A / 230 V
- Designed for centric load distribution
- 25 mm layer of multiplex covering (concealed)
- Turntable may be controlled from a light mixing console
provided by the customer (via DMX interface) |
|
 |
- Very rugged construction
- Rotating current transmission up to 2000 W / 230 V
- Capable of withstanding eccentric load distribution
- Suitable for open-air applications
- Clockwise / counter-clockwise rotation
- Speed may be controlled by a frequency converter
- Turntable may be controlled from a light mixing console
provided by the customer (via DMX interface) |
|
 |
- 100% resistant to overturning thanks to the raceway around
the outer perimeter
- Suitable for flush-floor installation
- Rotating current transmission up to 2000 W / 230 V
- May be supplied with lacquered peripheral skirt
- Clockwise / counter-clockwise rotation
- Speed may be controlled by a frequency converter
- 25 mm layer of multiplex covering (concealed)
- PCL-based selective turntable positioning and speed preselection
possible via DMX controller or touch panel |
|
 |
|
3 - 33 |
|
|
2,500 - 450,000 |
|
|
245/185 |
- Heavy-duty design, available in increments of 0.5 m
- Rotating current transmission up to 2000 W / 230 V
(optional 16 A / 400 V - 100 A / 400 V)
- Extensive range of turntables available on a rental basis
- Suitable for permanent installation
- Flush-floor installation possible, may be driven over
- 25 mm layer of multiplex covering (concealed)
- PCL-based selective turntable positioning and speed preselection
possible via DMX controller or touch panel |
|
 |
|
2.5 - 17 |
|
|
2,000 - 25,000 |
|
|
135 |
- Skeletal aluminium construction
- Fast assembly / dismantling
- Rotating current transmission up to 2000 W / 230 V
(optional 16 A / 400 V)
- Available in increments of 0.5 m; concentricity tolerance: +/- 1 mm
- Easy handling thanks to lightweight segments
- Extensive range of turntables available on a rental basis
- Flush-floor installation possible, may be driven over
- 25 mm layer of multiplex covering (concealed)
- PCL-based selective turntable positioning and speed preselection
possible via DMX controller or touch panel |
|
 |
| |
|
Our modular system
Bumat turntables are characterised by the following system components:
| (1) |
Friction wheel drives with pendulum bearings and torque brackets that have been specially designed and built for our turntables. |
| (2) |
A patented spindle with 3-dimensional adjustment facility, which guarantees even distribution of the load over all of the rollers arranged round the outer perimeter.
When a turntable is assembled for the first time, a laser is used to align the roller axes with the centre of the turntable in a similar way as on a car.
This ensures that the roller body rolls with virtually no wear at all. |
| (3) |
High-quality prelubricated ball bearings combined with special rollers made of polyamide or Vulkollan. |
| (4) |
Rollers that roll over the milled surface of the runner ring. |
|
 |
| |
|
|
|
|
|
|
|
|
